吴琼, 仰美霖, 窦芳丽, 郭杨, 安大伟. 2018: 星载双频云雷达的云微物理参数反演算法研究. 气象学报, 76(1): 160-168. DOI: 10.11676/qxxb2017.069
引用本文: 吴琼, 仰美霖, 窦芳丽, 郭杨, 安大伟. 2018: 星载双频云雷达的云微物理参数反演算法研究. 气象学报, 76(1): 160-168. DOI: 10.11676/qxxb2017.069
Qiong WU, Meilin YANG, Fangli DOU, Yang GUO, Dawei AN. 2018: A study of cloud parameters retrieval algorithm for spaceborne millimeter wavelength cloud radar. Acta Meteorologica Sinica, 76(1): 160-168. DOI: 10.11676/qxxb2017.069
Citation: Qiong WU, Meilin YANG, Fangli DOU, Yang GUO, Dawei AN. 2018: A study of cloud parameters retrieval algorithm for spaceborne millimeter wavelength cloud radar. Acta Meteorologica Sinica, 76(1): 160-168. DOI: 10.11676/qxxb2017.069

星载双频云雷达的云微物理参数反演算法研究

A study of cloud parameters retrieval algorithm for spaceborne millimeter wavelength cloud radar

  • 摘要: 使用星载雷达模拟器输出的模拟数据,为星载双频云雷达选择了最佳的频点组合,并开展了双频联合反演云微物理参数的算法研究。结果表明:(1)在位于大气窗口的6组频点组合中,94/220 GHz的组合对滴谱参数的微小变化较为敏感,有利于进行双频的联合反演。综合考虑不同频点的探测能力、衰减以及工业部门的制造水平后,认为94/220 GHz可以作为未来星载双频测云雷达的探测频点。(2)双频反演中最核心的双波长比(DWR)和体积中值直径(D0)的关系与冰晶粒子密度相关。当密度随着粒子直径变化时,DWR随着D0单调递增,当粒子密度固定不变时,DWR-D0曲线可能会出现非单调变化,从而使得固定密度时的反演比变密度时更加复杂。(3)后向迭代的双频反演算法同样适用于94/220 GHz进行云微物理参数的反演,并且对模拟数据的反演精度较高。此外,反演精度受到系统噪声以及定标精度的影响,为了满足反演精度的要求,系统噪声和定标误差应该控制在1 dBz以内。

     

    Abstract: Based on data simulated by satellite radar simulator unit, two frequencies have been chosen to study the dual-frequency retrieval algorithm of cloud microwave parameters. Results suggest that:(1) 94/220 GHz is sensitive to tiny changes in drop size, which is beneficial for the retrieval of cloud radar parameters. Based on the consideration of detective ability, attenuation and manufacturing level in the industrial sector, 94/220 GHz can be chosen as the detection frequency of spaceborne cloud radar in the future; (2) the relationship between dual wavelength ratio (DWR) and median volume diameter (D0) relies on the particle density. DWR will increase with D0 if the particle density changes with the diameter. Otherwise, DWR will fluctuate with D0 when the particle density is a constant. Thereby the retrieval of a constant density is very difficult; (3) backward iteration retrieval algorithm of dual frequency can be applied by 94/220 GHz and the retrieval results are consistent with the true values. Furthermore, the precision of retrieval is influenced by system noise and calibration precision. Therefore, the noise and calibration precision should be controlled under 1 dBz in order to satisfy the requirement of retrieval precision.

     

/

返回文章
返回